Home »C2X 2060 CNC Profile Surface Grinding Machine
C2X 2060 CNC Profile Surface Grinding Machine has a work table that moves in a longitudinal direction so attain an absolute contact with the machine bed as well as column support for cross feed movement to guarantee reliable contact between column slides as well as the machine bed in a particular defined column spot. Additionally, the system has a cartridge kind of spindle propped up by class 7 super (CPS) precision angular contact ball bearings to facilitate maximum run out of 0.002mm for obtaining steady as well as precise grinding support. For smooth as well as easy performance, each and every spindle is assembled by skilled technicians so as to offer our clients easy service to guarantee least temperature changes, noise or vibration.
| GENERAL | Model No. C2X-2060 | |
| Table size ( L * W ) | mm | 1500*500 |
| Grinding range ( L * W ) | mm | 1500*500 |
| Max. grinding height with new wheel and without magnetic chuck | mm | 500 |
| Distance from Table to spindle centre Min. Max. |
|
82 750 |
| Max. grinding width with relief at the front and rear | mm | 550 |
| Max. grinding width without relief at the front and rear | mm | 580 |
| Accuracy | As Per IS 2743 | |
| Control ( 2 Axis ) / Optional | HUST / Siemens | |
| Programming | Standard ‘G’ code and ‘M’ code, With NC File | |
| Grinding Wheel | ||
| Diameter Max. Min. |
mm mm |
400 200 |
| Width Max. Min. |
mm mm |
50 60 |
| Bore | mm | 127 |
| Wheel Spindle | KW | 7.7 |
| VERTICAL SLIDE (X-AXIS) | ||
| Stroke | mm | 550 |
| Rapid traverse | m/min | 3 |
| Min. programmable increment | mm | 0.001 |
| TRANSEVERSE SLIDE (Z-AXIS) | ||
| Stroke | mm | 550 |
| Continuous feed rate | m/min | 0.05-4 |
| Rapid traverse | m/min | 4 |
| Min. programmable increment | mm | 0.001 |
| Automatic intermittent feed each table stroke | Programmable | |
| Table | ||
| Number of T-slots | 2 | |
| Size | 14H7 | |
| Max. Longitudinal traverse | mm | 1650 |
| Infinitely variable speed | m/min | 2.5-25 |
| Max. weight of the job ( I ) with chuck (ii) without chuck |
|
225 425 |
| OPERATING SYSTEM | ||
| X-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Z-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Repeatability for 6 consecutive readings | ||
| Repeatability for 6 consecutive readings | mm | 0.002 |
| Total connected power (approx.) | kw | 15 |
