Home » C2X 1224 CNC Profile Surface Grinding Machine
The column has only cross feed movement so as to attain uniform contact between the columns, its slide along with machine bed in any column location. The column slide is lead by box type Turcite 'B' laminated format, hand to get smooth stick as well as slide free movement.
The cartridge type spindle has the support of 7 super (CPS) precision angular contacts with the ball bearings, preloaded along with selectively fitted into spindle cartridge. This will assure utmost run out of 0.002mm for steady as well as precise grinding. We assemble the spindles with skilled as well as expert technicians in temperature controlled sanitized room. The consequence is a spindle offers years of service with least temperature variation, noise or vibration.
| GENERAL | Model No. C2X-1224 | |
| Table size ( L * W ) | mm | 300*600 |
| Grinding range ( L * W ) | mm | 300*600 |
| Max. grinding height with new wheel and without magnetic chuck | mm | 400 |
| Distance from Table to spindle centre Min. Max. |
|
82 400 |
| Max. grinding width with relief at the front and rear | mm | 225 |
| Max. grinding width without relief at the front and rear | mm | 200 |
| Accuracy | As Per IS 2743 | |
| Control ( 2 Axis ) / Optional | HUST / Siemens | |
| Programming | Standard ‘G’ code and ‘M’ code, With NC File | |
| Grinding Wheel | ||
| Diameter Max. Min. |
mm mm |
350 200 |
| Width Max. Min. |
mm mm |
50 60 |
| Bore | mm | 127 |
| Wheel Spindle | KW | 3.7 |
| VERTICAL SLIDE (X-AXIS) | ||
| Stroke | mm | 350 |
| Rapid traverse | m/min | 3 |
| Min. programmable increment | mm | 0.001 |
| TRANSEVERSE SLIDE (Z-AXIS) | ||
| Stroke | mm | 350 |
| Continuous feed rate | m/min | 3 |
| Rapid traverse | m/min | 3 |
| Min. programmable increment | mm | 0.001 |
| Automatic intermittent feed each table stroke | Programmable | |
| Table | ||
| Max. Longitudinal traverse | mm | 700 |
| Infinitely variable speed | m/min | 1.5-18 |
| Hydraulic Motor Power | kw | 1.5 |
| Max. weight of the job ( I ) with chuck (ii) without chuck |
|
100 150 |
| OPERATING SYSTEM | ||
| X-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Z-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Repeatability for 6 consecutive readings | ||
| Repeatability for 6 consecutive readings | mm | 0.002 |
| Total connected power (approx.) | kw | 7.5 |
