Home » C2X 1260 CNC Profile Surface Grinding Machine
C2X 1260 CNC Profile Surface Grinder has a working table which can move only longitudinally. This guarantees a total contact as well as support from the machine bed, even at the table limited position. The V, also the flat guide ways are at all times laminated with Turcite 'B' to assure smooth table movement in spite of the load resting on the table.
The column merely does cross feed movement to assure consistent contact between the column, between the column slide as well as the machine bed in any column arrangement. The column slide is channeled by box type Turcite 'B' laminated ways, so as to get hold of smooth stick slither free movement.
The spindle housing makes just vertical movement to offer a steady distance between the vertical sides of the grinding wheel, so as to generate a completely vertical movement of the spindle as per the working table; the housing structure offers enhanced inflexibility.
| GENERAL | Model No. C2X-1260 | |
| Table size ( L * W ) | mm | 1500*300 |
| Grinding range ( L * W ) | mm | 1500*300 |
| Max. grinding height with new wheel and without magnetic chuck | mm | 400 |
| Distance from Table to spindle centre Min. Max. |
|
82 550 |
| Max. grinding width with relief at the front and rear | mm | 250 |
| Max. grinding width without relief at the front and rear | mm | 380 |
| Accuracy | As Per IS 2743 | |
| Control ( 2 Axis ) / Optional | HUST / Siemens | |
| Programming | Standard ‘G’ code and ‘M’ code, With NC File | |
| Grinding Wheel | ||
| Diameter Max. Min. |
mm mm |
300 165 |
| Width Max. Min. |
mm mm |
50 60 |
| Bore | mm | 76 |
| Wheel Spindle | KW | 3.7 |
| VERTICAL SLIDE (X-AXIS) | ||
| Stroke | mm | 460 |
| Rapid traverse | m/min | 1 |
| Min. programmable increment | mm | 0.001 |
| TRANSEVERSE SLIDE (Z-AXIS) | ||
| Stroke | mm | 320 |
| Continuous feed rate | m/min | 0.05-4 |
| Rapid traverse | m/min | 4 |
| Min. programmable increment | mm | 0.001 |
| Automatic intermittent feed each table stroke | Programmable | |
| Table | ||
| Number of T-slots | 1 | |
| Size | 14H7 | |
| Max. Longitudinal traverse | mm | 1650 |
| Infinitely variable speed | m/min | 2.5 – 25 |
| Max. weight of the job ( I ) with chuck (ii) without chuck |
|
225 425 |
| OPERATING SYSTEM | ||
| X-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Z-Axis | With L.M Guide, Ballscrow, and Servo Motor | |
| Repeatability for 6 consecutive readings | ||
| Repeatability for 6 consecutive readings | mm | 0.002 |
| Total connected power (approx.) | kw | 10 |
